Art-SDS-Uhpc Steel Fiber 2013|Copper Micro Steel Fiber

• Customization: Available
• Application: Bridge Decks
• Corrosion Resistance: High Corrosion Resistance
• Model NO.: ART-SDS-UHPC STEEL FIBER 2013
• Diameter: 0.2mm
• Hooked End Type: Straight
• Length: 13mm
• Material: Stainless Steel
• Tensile Strength: >2850MPa
• L/D(Length/Diameter): 65
• Transport Package: Bag
• Specification: ART-SDS-UHPC STEEL FIBER 2013
• Trademark: ARIT
• Origin: Tengzhou
• HS Code: 372596088

Product Description

ART-SDS-UHPC STEEL FIBER 2013
0.20mm Diameter 13mm Length Copper Micro Steel Fiber

Description

ART-SDS-UHPC STEEL FIBER 2013 is a Copper-coated micro steel fiber which is a new type of ultra-high strength concrete reinforcement material. Its raw material is steel cord with ultra-high strength (more than 2850MPa), which is directly cut from steel wire. Its diameter and strength performance are stable. Using special UHPC steel fiber equipment to produce stable length, flat and straight without bending. This product is widely used in long-span pedestrian bridges, highway and railway bridges, thin-walled silos, nuclear waste tanks, steel cable anchor reinforcing plates, ATM machine protective shells, etc.

Main Characteristics
 

Greatly enhance the tensile strength of concrete.

Has good mechanical properties,Good durability, good volume stability.

It has high strength, tensile, abrasion, crack, flexural, flexural and impact resistance.

Provides good impact,fatigue,shrinkage control and ductility in all grade concretes.

Instructions for Use

 

Dosage:minimum dosage is 120kg/m³-200kg/m³

Mixing:When pouring sand and aggregates into the hopper, mix an appropriate amount of loose steel fibers evenly, and then add cement. Put it in a mixing table, dry and mix for 2 minutes. If it is glued in rows of steel fibers, you need to add steel fibers after adding water so that the water can dissolve the bonding glue.

Put the evenly mixed fiber concrete into the conveyor and transport.

Concrete pouring and laying should be compacted.

 

Physical and chemical indicator
 

Items	Performance
Appearance	Copper coated
Diameter	0.20mm
Length	13mm
L/D(length/diameter)	65
Tensile strength	>2850Mpa
Application	UHPC

Packaging

20 kg per bag/carton or as your requirements,there are 50 bags or 1000kg in a pallet,20 tons per 20'container.
The pallets should be waterproof,don't stack pallets on top of each other.
Safety

Gloves and eye protection should be used when adding the steel fibers.